Jon Fields
08-29-2017, 4:54 AM
Hi
Can anyone help please. I have EZCAD software operating 20w fibre laser engraving machine from laserscript. I just cannot get the rotary to etch anything
without giving lines. Could anyone who has experienced this offer any advice. Normal marking is fine, but bot when the rotary is plugged in.
many thanks
Jon
Can anyone help please. I have EZCAD software operating 20w fibre laser engraving machine from laserscript. I just cannot get the rotary to etch anything
without giving lines. Could anyone who has experienced this offer any advice. Normal marking is fine, but bot when the rotary is plugged in.
many thanks
Jon