ken hatch
08-27-2017, 10:38 AM
The last item to be finished of the portable workshop is the tool box. I finished cleaning it up last night, as much as it will be "cleaned up" it is a tool box don'tchknow, and put a coat of Danish Oil on the outside. Today comes the hard part....Deciding what tools to take. Too many and the tool box becomes unwieldy and too heavy to be "portable", Too few and either the "work arounds" take the pleasure out of making or even the project becomes dead in the water.
The list leads off with a couple of planes, I expect a #3 and a #5 with two cutter sets. A chisel roll with 1/4" through 1" plus at least one paring chisel. A couple or three saws, I have not decided between Japanese or Western, there are advantages to each. Marking stuff, squares, knifes, winding sticks, tapes, rules, and so on. Rabbet plane, plough plane, router plane....Anyway you get the idea. A couple of bench appliances like a bench hook also need to find a place as well.
Of course all this may be unnecessary because the bench and tool box may end up being a table and accessory to hold the whisky glass every evening :).
Anyway here are a couple of photos of the tool box, click 'em to big 'em:
366826
With the lid open:
366827
ken
The list leads off with a couple of planes, I expect a #3 and a #5 with two cutter sets. A chisel roll with 1/4" through 1" plus at least one paring chisel. A couple or three saws, I have not decided between Japanese or Western, there are advantages to each. Marking stuff, squares, knifes, winding sticks, tapes, rules, and so on. Rabbet plane, plough plane, router plane....Anyway you get the idea. A couple of bench appliances like a bench hook also need to find a place as well.
Of course all this may be unnecessary because the bench and tool box may end up being a table and accessory to hold the whisky glass every evening :).
Anyway here are a couple of photos of the tool box, click 'em to big 'em:
366826
With the lid open:
366827
ken