PDA

View Full Version : Gloat: New Custom Router Table


Robert Ducharme
10-29-2005, 5:33 PM
I finally decided to get a new custom router table while I worked on my other workshop cabinets. This has highly precise custom fitted joints and uses minimal duct tape! :D

It has turned out to be suprising effective in capturing the dust and took a whole 10 minutes to create - I know, I probably rushed the finishing job just a little - and the sanding wasn't too good either.:p

Once I actually build the saw/router table, I will be putting this table up on the auction block - get your bids in early!!!

Robert
Dick Parr
10-29-2005, 5:35 PM
Nice addition Robert, that should do the job for you.:)
Bernie Weishapl
10-29-2005, 6:11 PM
Nice job Robert. Looks like it will work pretty well for you.
Chris Barton
10-29-2005, 6:13 PM
Rob, there may be a small problem here. I happen to hold several patents on the use of duct tape and cardboard boxes as cabinetry and I think there may be an infringment issue here...
Jim Becker
10-29-2005, 6:49 PM
Robert, no question, your creativity is showing through!! Hey, it works! What more can you ask for?? Oh, ok... ;)
Jerry Olexa
10-29-2005, 7:28 PM
Brilliant!!
Frank Hagan
10-30-2005, 12:29 PM
I just want to know if you get better Dish reception that way? :p
Ken Fitzgerald
10-30-2005, 12:53 PM
Excellent Robert! and it's disposable too!
Ken Shoemaker
10-30-2005, 12:57 PM
Do I recognize the wood as cococardboard????
Lee DeRaud
10-30-2005, 12:59 PM
Do I recognize the wood as cococardboard????Looks more like paperdauk, but that could just be my monitor.
Robert Ducharme
10-30-2005, 2:01 PM
Wrong, Wrong, Wrong:rolleyes:

You have mistaken the highly spalted nature of the wood shown in the cabinet as words/drawings. And it is certainly not disposable - still waiting for the auction bids:D

The Dish reception is much better when you consider the antenna/receivers are not in the box:p

Chris, no way am I infringing on your patents. I am accumulating my royalty payments and they will be in the mail when the value is greater than the postage - based on 2% of cabinetry value, you should receive them after I finish the next 20000 cabinets or October, 2049.
Andy Hoyt
10-30-2005, 3:01 PM
No No No. The stuff is that fancy new item from Dow BioProducts.

It's their WOODSTALK fiberboard (http://www.sawmillcreek.org/showthread.php?t=25727):D

This is a Router Table after all.
Ray Arnold
10-30-2005, 9:27 PM
Now thats some real Yankee ingenuity, heck with woodworking, I'm taking up Origami . :D
Michael Gabbay
10-31-2005, 8:10 AM
Robert - Are those mitered dovetails? They look handcut. :D
Ken Fitzgerald
10-31-2005, 8:57 AM
Still waiting for auction bids Robert? Remember it's disposible.......:D
Lee DeRaud
10-31-2005, 10:39 AM
Now thats some real Yankee ingenuity, heck with woodworking, I'm taking up Origami . :DThey used to have an "Origami Workshop" show in DIY, but they moved it to PaperView.:p
Ray Arnold
10-31-2005, 1:14 PM
They used to have an "Origami Workshop" show in DIY, but they moved it to PaperView.:p


ROTFLMAO , I thought it was on Home "Box Office" :p