Brandon Speaks
08-22-2017, 10:09 AM
Hi Guys,
I have a Grizzly 0555LANV saw that I have owned for about 5 years. I always ran it with a 1/2 inch blade, and although I know I did not have all the adjustments perfect it always ran and cut great and the blade tracked how I wanted it to.
I got a 3/8 blade to do some carving blanks and I cannot make this saw run right.
I set it up, get the blade tracking, adjust all the guides and it seems to be running correctly. Then after a couple cuts it will be tracking horribly and all the guides are out of alignment, I have cycled through this 4 or 5 times and I am out of ideas.
Could it be something got knocked out of wack when I moved last year and I just never noticed with the big blade, are my guides shot?
Any ideas would be appreciated.
I have a Grizzly 0555LANV saw that I have owned for about 5 years. I always ran it with a 1/2 inch blade, and although I know I did not have all the adjustments perfect it always ran and cut great and the blade tracked how I wanted it to.
I got a 3/8 blade to do some carving blanks and I cannot make this saw run right.
I set it up, get the blade tracking, adjust all the guides and it seems to be running correctly. Then after a couple cuts it will be tracking horribly and all the guides are out of alignment, I have cycled through this 4 or 5 times and I am out of ideas.
Could it be something got knocked out of wack when I moved last year and I just never noticed with the big blade, are my guides shot?
Any ideas would be appreciated.