PDA

View Full Version : Please halp, Ruida RDC644XG


Andrew Semjonow
08-21-2017, 1:10 PM
Hallo, I have new RDC644XG machine, in display show wrong x-y coordinates (x-10000, y-10000),when laser head drive on display show (x-10234 y-10342), must be less when (x-900 y- 600) because my work place 900-600. When my laser start it go to home and go to machines metal wall.
David Gray
08-21-2017, 5:27 PM
Hallo, I have new RDC644XG machine, in display show wrong x-y coordinates (x-10000, y-10000),when laser head drive on display show (x-10234 y-10342), must be less when (x-900 y- 600) because my work place 900-600. When my laser start it go to home and go to machines metal wall.

1. Load your file
2. adjust head of machine to were you want it to start the job.
3. push Origin on the controller
4. push frame on the controller and observe the path the laser traces out
5. if you are still having size problems its probably a software sizing problem check settings or make the file up in a different program.