David Falkner
08-14-2017, 5:55 PM
I don't know if this should be here in General Woodworking and Power Tools so please move it if there's a better spot.
In making the guitar bridges I use my spindle sander to sand the wings on each end of the bridge. But all I have are 80 and 100 grit sleeves so I was all set to order some finer grit sleeves when it crossed my mind that I should just make some. I didn't check to see if there are dozens of 'how-to' videos on this but rather decided to just use what I had on hand and go for it.
Here are the completed sleeves yet to be unwrapped -
366055
And here's the video on making these -
https://www.youtube.com/watch?v=vO2QT0LjLSw
Enjoy!
David
In making the guitar bridges I use my spindle sander to sand the wings on each end of the bridge. But all I have are 80 and 100 grit sleeves so I was all set to order some finer grit sleeves when it crossed my mind that I should just make some. I didn't check to see if there are dozens of 'how-to' videos on this but rather decided to just use what I had on hand and go for it.
Here are the completed sleeves yet to be unwrapped -
366055
And here's the video on making these -
https://www.youtube.com/watch?v=vO2QT0LjLSw
Enjoy!
David