I trashed a cart tire....

[Wade Lippman]

Today, without checking the tire pressure, I carried something heavy in my lawn cart. It very quickly trashed the tire. The side walls are just attached to the tread by threads.

https://www.amazon.com/dp/B00KCIZ5SM/ref=asc_df_B00KCIZ5SM5110760/?tag=hyprod-20&creative=394997&creativeASIN=B00KCIZ5SM&linkCode=df0&hvadid=193142362025&hvpos=1o2&hvnetw=g&hvrand=169385353604807401&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9005635&hvtargid=pla-307357655421
they are now solid tires; mine have a tube in them.

1) I filled it with air and it looks fine. From a few feet away you can't tell it from the other tire. Is it okay to use like this, or am I risking some sort of disaster?

2) It is a 4.10/3.50-4". I see replacement wheels for $10, but they are 5/8" bore and mine is a 1/2". Is there anything to be done about this? A shim? Take the bearing out of the old wheel maybe?

3) I can buy just a tire, but they are more expensive then the wheels. Are all 4.10/3.50-4" interchangeable, or do I have know something else to have it fit the existing tire. Getting the old tire off and back on was a horrible chore. Is there some secret to it? If not, I really want a new wheel.

thanks

[Bruce Page]

Bronze bushings are commonly available. Slip it into a new wheel and you’re rolling again.

Bunting Bearings AA628-25 Sleeve (Plain) Bearings, Powdered Metal SAE 841, 1/2 " Bore x 5/8 " OD x 5/8 " Length (3 Pack) (https://www.amazon.com/Bunting-Bearings-AA628-25-Sleeve-Powdered/dp/B0040GK942/ref=sr_1_11?s=industrial&ie=UTF8&qid=1502037941&sr=1-11&keywords=1%2F2+x+5%2F8+bronze+bushings)

[Mike Henderson]

If you just use this around your home, I'd use it until it completely fails and then get a new tire.

Unless you have projects that just have to be done on that day and a tire failure will cause you major problems. But if that's your situation, you should have a spare on hand.

Mike

[Wade Lippman]

Okay, I will run it until it fails and then get a new tire and the bushings. Thanks.

[Bruce Page]

Okay, I will run it until it fails and then get a new tire and the bushings. Thanks.
With my luck it would fail right when I needed it the most. :rolleyes:

[Mike Cutler]

Okay, I will run it until it fails and then get a new tire and the bushings. Thanks.

Wade

If you have a Tractor Supply near you, they have the adapter bushings. They call them sleeves though. I did the same thing to convert my hand truck over to solid tires. Same reason too!:eek:

[John K Jordan]

Wade

If you have a Tractor Supply near you, they have the adapter bushings. They call them sleeves though. I did the same thing to convert my hand truck over to solid tires. Same reason too!:eek:

Northern Tool also carries nearly any type of tire/wheel/tube; most farm stores have a fair selection.

JKJ

[Larry Frank]

Just not in my nature to run it until it fails. I would rather fix it when I had time than run it until it fails.

All of my yard stuff with tires that have to be checked for air pressure have had that green goo stuff put in them. I almost never have to put air in tires now. Cheap and effective preventative.

[John K Jordan]

Just not in my nature to run it until it fails. I would rather fix it when I had time than run it until it fails.

All of my yard stuff with tires that have to be checked for air pressure have had that green goo stuff put in them. I almost never have to put air in tires now. Cheap and effective preventative.

I use that too, or some apparently even better white goo from Kubota. When the tires get even worse on non-critical things (wheelbarrows, hand trucks, etc) I put tubes in them.

I gave a can of Fix-a-Flat to a friend to keep in her car. She said her tire guy told her to never use that stuff, the goo makes repairing a tubeless tire impossible. My tire guy said nonsense, he repairs them all the time - if someone says they can't they are lazy or uneducated. Or both. (I've been using this tire place for over 30 years.)

JKJ

[Marc Jeske]

Somewhere I read Festool is coming out soon with their own shade of Green Goo.

Marc :D

[michael langman]

I just did the same thing to my wheelbarrow tire Wade.
I am going to put a tube in it as John has said. I had the same thing happen to my old cart for the lawn mower,and put tubes in them. They lasted for years.

[Mike Cutler]

I use that too, or some apparently even better white goo from Kubota. When the tires get even worse on non-critical things (wheelbarrows, hand trucks, etc) I put tubes in them.

I gave a can of Fix-a-Flat to a friend to keep in her car. She said her tire guy told her to never use that stuff, the goo makes repairing a tubeless tire impossible. My tire guy said nonsense, he repairs them all the time - if someone says they can't they are lazy or uneducated. Or both. (I've been using this tire place for over 30 years.)

JKJ

John

I think I'd be concerned about the TPMS sensors.
It does make a heckuva mess inside the tire and rim.

[John K Jordan]

John

I think I'd be concerned about the TPMS sensors.
It does make a heckuva mess inside the tire and rim.


Point noted, but no sensors in the tires of this girl's old minivan. A far greater concern was breaking down somewhere at night with a nail in the tire and little three kids in the car. (This family was trying to come back from being homeless after abandonment by the alcoholic husband/father.)

JKJ

[Bruce Wrenn]

Run into local HF, with 20% off coupon in hand and buy a $4.99 tire, and hub with ball bearings included.

[John K Jordan]

Run into local HF, with 20% off coupon in hand and buy a $4.99 tire, and hub with ball bearings included.

For that price, maybe buy one for each wheel. They will all be identical and might save dealing with another failed tire the first one failed from old age.

Spray the sidewalls occasionally with Armor All or some other protectant and the cart should be good for a lifetime.

JKJ

[Matt Day]

I'd buy the new wheel BEFORE the old one fails. Run it into the ground, then grab the new one you have on hand and no time lost running to the store.