PDA

View Full Version : Rotary Attachment for Glavo CLC Fiber laser



Charles Sather
08-05-2017, 2:40 PM
has anyone used an aftermarket rotary table for a CLC fiber galvo 30w? would like to know if there is a specific one that you used and how to connect it up and get it working.

Charles Sather
08-07-2017, 5:34 PM
crickets.......

Scott Shepherd
08-07-2017, 10:12 PM
You are the first person I've seen even mention CLC lasers, so I'm guessing that's why no one has responded.

Wish I could help, but I've never seen one.

Charles Sather
08-07-2017, 11:33 PM
You are the first person I've seen even mention CLC lasers, so I'm guessing that's why no one has responded.

Wish I could help, but I've never seen one.


yeah I figured as much for this brand.. not a big deal, was just hoping someone had some kind of info on setting up a rotary. Pretty proprietary I guess. thanks for responding.

Bill George
08-08-2017, 11:03 AM
yeah I figured as much for this brand.. not a big deal, was just hoping someone had some kind of info on setting up a rotary. Pretty proprietary I guess. thanks for responding.
So you own the machine and purchased new or used? If you have not purchased I would look else where. Never heard of it...

Kev Williams
08-08-2017, 12:36 PM
Control Laser Corp, Orlando Florida, 52 years, etc...

The offerings on their website don't look at all like the standard Chinese fare, actually looks like good stuff!
https://www.controllaser.com/

Jacob John
08-08-2017, 3:45 PM
Control Laser Corp, Orlando Florida, 52 years, etc...

The offerings on their website don't look at all like the standard Chinese fare, actually looks like good stuff!
https://www.controllaser.com/

It's a Hans laser. They are one of the largest Chinese manufacturers of lasers, at least that I've heard of. I believe this company is their US arm. I've looked at their Hobbylase, but ultimately decided I wanted something bigger.

Charles Sather
08-08-2017, 3:49 PM
its actually new.. and yes.. for the price they should have included a cabinet, stand and rotary.. at least some training videos since we are in AK kinda disappointing since it is US based.

Jacob John
08-08-2017, 11:50 PM
its actually new.. and yes.. for the price they should have included a cabinet, stand and rotary.. at least some training videos since we are in AK kinda disappointing since it is US based.


This is the Hans equivalent to the Hobbylase. I really like it, and at first thought it was exactly what I needed, but I now prefer an open desktop. It's a pretty good looking machine though. http://www.hanslaser.net/products/2.html