6x50 Sandpaper Rolls

[Christopher Hedges]

After doing a bit of research, I have been unable to find rolls this size made by Norton, Mirka, and several other manufacturers. Though I admit it is totally possible that I simply didn't look in the right places! Those of you using this size paper in your drum sander, what brand are you finding to work best when sanding primarily hardwoods?

Chris

[Bruce Page]

Have you tried Klingspor? What type of backing do you need? Plain, H&L?

[Cary Falk]

I buy all my rolls from Industrial abrasive. I buy 3" but here is some 6".
http://www.industrialabrasives.com/sanding-rolls-aluminum-oxide-polycotton-drum-sanding-rolls-6x50-ft-c-79_156.html?zenid=lbhk77nq099aofjpskkq61pk40

[Bill Dufour]

are these inch size? are they special ends or could you simply cut down a 50 foot roll?
Bill

[Paul K. Johnson]

Try Online Industrial Supply. I don't know if they have that size but they always have anything I'm looking for. Prices are good and shipping is fast.

[Christopher Hedges]

Foot size. No taper. Multiple cuts out of one roll.

[Christopher Hedges]

Are you satisfied with what you use?

[Cary Falk]

If you were asking me, I am happy with Industrial Abrasive.

[Christopher Hedges]

If you were asking me, I am happy with Industrial Abrasive.

Yes. Thanks. Another local cabinetmaker uses them and is happy with them too.

[Bill Dufour]

I thought sanders maxed out around 4 foot wide. I had no idea they went to 6 foot wide. Bet that paper costs a fortune. No wonder you are asking for good prices and long lasting.
Bill D