Rick Hubbard
06-13-2017, 6:58 PM
We are doing some serious rebuilding work on a Jet 16 inch planer and when we took the drive chain cover off, we saw this:
362055
One of the chains has a tensioner. The other does not. There appears not to be enough slop in the chain to take out a link, so I'm wondering if it is OK the way it is.
Any ideas would be appreciated
362055
One of the chains has a tensioner. The other does not. There appears not to be enough slop in the chain to take out a link, so I'm wondering if it is OK the way it is.
Any ideas would be appreciated