Robert . Payne
05-17-2017, 2:58 AM
Hi All,
We have a VLS 4.60 and we're having to replace our air assist source. The manual states 3.5CFM @ 50PSI but we normally run it at 10-15PSI. 3.5CFM just seems extremely high to me, I know it blows air on the mirrors and sorts but it still doesn't feel like it's draining 3.5CFM.
Has anyone actually taken a valve and measured the CFM drain rate on their air source when the laser is going? I'm betting it's closer to 0.25-1 CFM but I could be horribly mistaken it's hard to judge.
Cheers,
Robert
We have a VLS 4.60 and we're having to replace our air assist source. The manual states 3.5CFM @ 50PSI but we normally run it at 10-15PSI. 3.5CFM just seems extremely high to me, I know it blows air on the mirrors and sorts but it still doesn't feel like it's draining 3.5CFM.
Has anyone actually taken a valve and measured the CFM drain rate on their air source when the laser is going? I'm betting it's closer to 0.25-1 CFM but I could be horribly mistaken it's hard to judge.
Cheers,
Robert