delta 46-460 type 1

[Wally Wenzel]

If any one is still looking for the off-on switch for their lathe, I found one right from Delta Warranty and service dept. at 1 800 223 7278. A real bear to install but got it done. Wally

[Jim Meyer]

Thanks, Put phone number in safe place just in case my switch goes belly up.

[Robert Hayward]

I sold my Delta lathe and have a new switch I bought as a spare sitting in a drawer. If anyone needs one.

[Roger Chandler]

My switches are doing fine, but I did order two new ones to have on hand in case they ever failed. I do keep my controller board and switches blown out with compressed air.

[Wendell Steele]

I sold my Delta lathe and have a new switch I bought as a spare sitting in a drawer. If anyone needs one.

message sent

[Michael James]

I just ordered one today so they still have some available. Just bumpin this up! Thanks for the tip Wally!

If any one is still looking for the off-on switch for their lathe, I found one right from Delta Warranty and service dept. at 1 800 223 7278. A real bear to install but got it done. Wally