View Full Version : Wenge
Dan Kopack
05-04-2017, 7:50 AM
First time using wenge wood. The piece I have has been in shop for years, all sides are very dark in color with wonderful grain, etc. Began milling and much to my surprise the cut or planed wood is yellow in color with dark streaks running thru the wood. Attractive but not what I was hoping for. Will the wood darken over time? I tried applying some tung oil to a scrap piece, no change in color. Confused!
Steve Jenkins
05-04-2017, 8:41 AM
It will change back in just a day or two
Bill White
05-04-2017, 10:24 AM
And watch out for splinters. DAMHIK.
Bill
Dan Kopack
05-04-2017, 1:44 PM
Found out early about splinters, thanks
Dan Kopack
05-04-2017, 1:45 PM
Ok, thanks
Bill McNiel
05-05-2017, 1:36 PM
359645
Wenge finished with Waterlox
Dan Kopack
05-14-2017, 2:47 PM
Very nice work
Bill McNiel
05-15-2017, 10:39 PM
Very nice work
Thank you Sir.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.