File specifications disappearing - ULS M300 & Corel X3

[Ian Stewart-Koster]

Tonight, I ran three files, and what is very weird, is that a simple star file to be cut in acrylic I sent, with settings/speeds in Corel were Power=30, Speed=2, PPI=1000, from memory.

The M300 console showed them as P=0, S=0, PPI=0, and did nothing.

The next file tried - same problem. Swapped the cable (LPT lead) and no difference.

I'm wondering what could be deleting the setting figures?

Time for another shutdown and reboot of the PC. I did reboot the laser, four times, and that made no difference.

Any suggestions would be welcomed! Thanks.

[Ian Stewart-Koster]

Solved: what looked like hairline outlines were actually fat outlines.

But I still have a sticky Y axis drive problem again like last October.