View Full Version : Another beal buffing question
Trevor Mills
04-22-2017, 11:00 PM
I've used the 3 part beal system on a walnut oil finish with good results, but is it useful on a tung oil finish?
Russell Neyman
04-23-2017, 2:52 PM
Summing it up in a single word: Test. Pretty sure it will work.
John K Jordan
04-23-2017, 9:48 PM
I've used the 3 part beal system on a walnut oil finish with good results, but is it useful on a tung oil finish?
It will work on any hardening oil finish after it is completely hard.
BTW, I don't always use all three parts depending on the wood. For example, on dark woods the white diamond can look bad if it gets embedded in open pores and natural voids.
JKJ
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.