Lester Sak
04-12-2017, 6:39 PM
I recently finished a pedestal desk for a friend and am now starting on the hutch. The desk is frame and panel construction using african sapele and sapele veneered plywood. I just made the sides for the hutch by gluing up sapele boards, but now I'm wondering if they should have been frame and panel as well to control any wood movement.
Are there any suggestions for joining the horizontal center portion of the hutch to the 2 solid wood sides? The horizontal section will have a small cabinet on each end. I've included a rough drawing.
358213
Thanks for the help!
Les
Are there any suggestions for joining the horizontal center portion of the hutch to the 2 solid wood sides? The horizontal section will have a small cabinet on each end. I've included a rough drawing.
358213
Thanks for the help!
Les