View Full Version : Lasering aluminum cake pans
mike klein
04-08-2017, 11:33 PM
I have a customer that has some bare aluminum cake pan covers they want their logo engraved on them. Does a person have to use thermark or cermark on them or can a co2 or fiber mark the bare metal.
Kev Williams
04-09-2017, 12:04 AM
your fiber can mark them easy enough, but I'm not familiar with gantry fibers--
Your 60w Epy should be able to Cermark them if black is okay. My 40w metal lasers won't Cermark aluminum reliably, but my 80w glass laser does-
But a C02 with your wattages won't do squat to aluminum by themselves...
mike klein
04-09-2017, 10:07 AM
your fiber can mark them easy enough, but I'm not familiar with gantry fibers--
Your 60w Epy should be able to Cermark them if black is okay. My 40w metal lasers won't Cermark aluminum reliably, but my 80w glass laser does-
But a C02 with your wattages won't do squat to aluminum by themselves...
I'll give it a try with the fiber and see what happens.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.