PDA

View Full Version : Congrats to A&E magazine



Mike Null
03-14-2017, 6:13 AM
I just received the April issue of A&E magazine and found it to be one of their better efforts. Not to say they aren't always worth the read.

There is a particularly good article on heat bending plastic with your laser.

You can get this magazine for engravers at no cost. https://a-e-mag.com/

John Lifer
03-14-2017, 10:06 AM
I got mine yesterday also. Leafed through and found a familiar name. And a LOT of sublimation information if you do that sort of stuff also.

Mike Null
03-14-2017, 11:16 AM
One thing I forgot to mention is that Trotec, one of our longtime sponsors, just acquired ESS in Dade county Florida. ESS will continue with the staff they had but will market Trotec products. Those of you who have had the pleasure of dealing with ESS over the years know that they are a top notch organization.

Rodne Gold
03-16-2017, 3:47 AM
Great mag.. especially cos its free :)
I read the bending article .. we tried the laser as a bender..it's really not a workable solution .. you have almost no control .. a wire/strip bender is cheap and works
A classic case of when you have a hammer.. everything looks like a nail.