Nick Lazz
03-12-2017, 11:46 AM
This machine is new to me and as I try to get familiar with it I was going to adjust speed with belt and or remove it... I loosened the bolts holding the motor but it is already adjusted for the shortest distance. Seems the only way to get this belt off is to cut it and get a slightly larger belt, or just a new one.
The machine sat for 6 or 7 years so I'm wondering if the belt shrunk? I wouldn't mind changing it anyway because there seems to be a flat spot on the belt from sitting. Pretty sure this is the original belt as it has never been used.
Any help would be appreciated.
The machine sat for 6 or 7 years so I'm wondering if the belt shrunk? I wouldn't mind changing it anyway because there seems to be a flat spot on the belt from sitting. Pretty sure this is the original belt as it has never been used.
Any help would be appreciated.