Andrew J. Coholic
03-02-2017, 9:14 PM
Just curious if anyone has or has had one of these smaller shapers - has an integral sliding table with outrigger, from the looks of it.
Im looking at getting a second shaper for our shop mainly to have a tenon setup when we are doing doors, and leaving the sticking set up on the larger 7.5HP Cantek.
There is one of these used up for sale about 10 hrs from me, looks like a decent refurb. But I cant find any additional info on the internet. Its not a real heavy machine - and only 4 HP but looks like it would be fine for cabinet and the few dozen man doors a year we make. Again, I am looking at something dedicated to tenoning using dedicated door cutters.
Any info, good or bad appreciated. Thanks.
Im looking at getting a second shaper for our shop mainly to have a tenon setup when we are doing doors, and leaving the sticking set up on the larger 7.5HP Cantek.
There is one of these used up for sale about 10 hrs from me, looks like a decent refurb. But I cant find any additional info on the internet. Its not a real heavy machine - and only 4 HP but looks like it would be fine for cabinet and the few dozen man doors a year we make. Again, I am looking at something dedicated to tenoning using dedicated door cutters.
Any info, good or bad appreciated. Thanks.