Mikeal Richards
02-28-2017, 10:45 AM
Hello,
I am hoping for some ideas on issues I am having with a 60 red/black Chinese laser. I received it and got everything setup and plugged in but I get nothing to power up at all. I checked the Estop button and the fuses at the power cord and all check good with volt meter. I am getting 120 v to the CPU and Laser PSU but nothing coming out of ea. All lights are off inside on drive controls/PSU & CPU. Even the LED light strip inside is out. Any ideas or suggestions would be greatly appreciated.
Thanks,
I am hoping for some ideas on issues I am having with a 60 red/black Chinese laser. I received it and got everything setup and plugged in but I get nothing to power up at all. I checked the Estop button and the fuses at the power cord and all check good with volt meter. I am getting 120 v to the CPU and Laser PSU but nothing coming out of ea. All lights are off inside on drive controls/PSU & CPU. Even the LED light strip inside is out. Any ideas or suggestions would be greatly appreciated.
Thanks,