PDA

View Full Version : Styrofoam Glue?



Bruce Page
10-14-2005, 2:08 PM
I need to make up a box out of 2” thick Styrofoam. Is there a permanent glue other than contact cement that would work well?

Joe Pelonio
10-14-2005, 2:13 PM
Watch it, some glues will melt it. I use Gorilla Glue. It tends to expand
so you have to clamp or tape it until it's good and dry.

Doug Shepard
10-14-2005, 2:15 PM
The make stuff specifically for gluing styro that comes in caulking gun tubes. It's usually by the Liquid Nails/etc at most stores. I think they make the special stuff for styro because some of the other construction adhesives will dissolve the foam.

Don Baer
10-14-2005, 2:28 PM
When I glued insulation to the inside of a dog house I just used the yellow stuff. That was 3 years ago and it's still holding out in the weather.

Keith Outten
10-19-2005, 7:46 PM
Bruce,

Liquid Nails makes a glue that works with foam.

Bruce Page
10-19-2005, 10:45 PM
Thanks guys, I took Don's advice and used yellow glue and it worked great. I'm pretty sure that the 2" styrofoam would break before the glued butt joints would let go.