Full inset hidden hinge needed.

[Stuart Welsh]

I'm looking for a full inset hidden hinge that opens the cabinet door wide enough to be out of the way of a drawer. The slides are Blum and there is about 1/2" between the side of the drawer and the cabinet side. Does such a hinge exist and if so who makes it?

Thanks,

Stuart

354127

[Adam Herman]

maybe a 180 degree soss hinge that mortises on the edge of the door? anything like a standard cup hinge will have to have an arm that sticks way out.

[Lee Schierer]

Soss makes exactly what you need. 354153

[Jerry Miner]

If you are still at the design phase--- and haven't built the drawer yet-- you could use a Blum 155 zero-protrusion hinge (B071T7500N) in an inset application by adding a panel or filler block, something like this:

354171

I highly recommend doing a mock-up first, to understand all the clearances. And you will have to locate the hinges above and below the drawer, as the door will clear, but not the hinge.