Wagner conversion gun and BM Advance

[John Lasher]

I have a Wagner Conversion spray gun with a 2.0 needle. I am attempting to spray Benjamin Moore Advance satin paint.
I have getting orange peel finish on my cabinet doors.
I have been setting 40 psi at the compressor and 15 to 20 at the gun.
I have tried thinning the paint and adding Floetrol in various amounts, and changing the flow and pressure settings on the gun.
No matter what I do I always am getting orange peel finish.
Has anyone used the gun with Advance and had success? If so can you advice me?

[Chris Fairbanks]

I have an AAA so I don't know on your gun but what temperature is the room and paint you are spraying in? Advance is a thick material and if it is cold it's going to be even thicker. Thanks.

[Jamie Buxton]

How far from the workpiece is the gun tip? My gun tip really wants to be within 8 inches of the surface, otherwise I get orange peel.