View Full Version : Dovetail Jig
Joseph Durnya
02-10-2017, 10:42 AM
hey guys, have a porter cable 24" dovetail jig ( the red one ) and very happy with it.. looking for a smaller one and was going to go with the porter cable 12" any feedback on it ?
thanks,
Joe
George Bokros
02-10-2017, 12:42 PM
I have the 16 which is the 121 with added templates. I am happy with it. I have used it twice.
Doug Hepler
02-11-2017, 9:54 AM
Joseph
I have the 4216. I have used it many times and I am satisfied with it. It is easy to set up and is accurate. The only downside is that the spacing is not variable. I recommend that you get the kit. At least, get the box joint template'
Doug
Bob Elliott
02-15-2017, 10:55 PM
Joseph
I have the 4216. I have used it many times and I am satisfied with it. It is easy to set up and is accurate. The only downside is that the spacing is not variable. I recommend that you get the kit. At least, get the box joint template'
Doug
+1
i use mine for making drawers exclusively. If you are ok with making the same joints with consistent spacing it's a good jig.
Joseph Durnya
02-17-2017, 1:52 PM
thanks guys ! i ended up picking up the 4216 AND a used 16" omnijig. Figure i can set them up for different jobs!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.