Banjo for a Grizzly GO462

[Chuck Sager]

I just got a Grizzly GO462. I knew it had some issues but the three piece banjo has to go. I called Grizzly today to see it they had something and they said no. Wondering what my options might be to getting I different banjo.

[Roger Chandler]

I would suggest that you perhaps order a banjo from Grizzly that fits the 18" G0733, and use the clamp plate from your G0642, but you would also need to get the correct nut to fit on the new eye bolt on the new banjo. You might have to drill out the hole on the clamp plate, but I am not sure on that. If the gap in the G0462 bed ways is 1.5" wide, then the clamp plate on the new banjo should work without needing to be enlarged. The gap on the G0733 is 1.5"