vintage tooling High speed shoulder plane

[jack forsberg]

The vintage trenching heads from England . What,s a mortise without a tenon? this is not a RECOMMENDATION ONLY MY WAY OF DOING IT.


https://www.youtube.com/watch?v=Lcn2ksnMc04

[Andy Giddings]

Can't imagine why those went out of fashion - seems well within OSHA/Health and Safety at Work guidelines to me :-)

[Lee Schierer]

Impressive cutter. I wonder if it tries to self feed.

[jack forsberg]

Impressive cutter. I wonder if it tries to self feed. the bronzes head has a built in limiter that said knife project is 1/16" off the block. Not made for a sears saw! I have 4 of these up to 13" in diameter On the Wadkin 18" cross cut saw. that saw is very heavy and has a 1 1/4" spindle with 6" under the nut. it can hold heads 4.5" wide to do a bird mouth cut in one go.

http://www.practicalmachinist.com/vb/attachments/f79/119745d1413762647-why-radial-arm-saws-bought-rarely-used-wadkin-cc-1.jpg

[Frederick Skelly]

That's a heck of a setup Jack! Looks like once you get 'er dialed in, it's a perfect fit. I'm green with envy!
Fred

[Ben Abate]

That is amazing. I'd rather watch than operate that big one. Wow