View Full Version : vintage tooling High speed shoulder plane
jack forsberg
01-14-2017, 12:46 PM
The vintage trenching heads from England . What,s a mortise without a tenon? this is not a RECOMMENDATION ONLY MY WAY OF DOING IT.
https://www.youtube.com/watch?v=Lcn2ksnMc04
Andy Giddings
01-14-2017, 12:50 PM
Can't imagine why those went out of fashion - seems well within OSHA/Health and Safety at Work guidelines to me :-)
Lee Schierer
01-14-2017, 12:54 PM
Impressive cutter. I wonder if it tries to self feed.
jack forsberg
01-14-2017, 1:12 PM
Impressive cutter. I wonder if it tries to self feed. the bronzes head has a built in limiter that said knife project is 1/16" off the block. Not made for a sears saw! I have 4 of these up to 13" in diameter On the Wadkin 18" cross cut saw. that saw is very heavy and has a 1 1/4" spindle with 6" under the nut. it can hold heads 4.5" wide to do a bird mouth cut in one go.
http://www.practicalmachinist.com/vb/attachments/f79/119745d1413762647-why-radial-arm-saws-bought-rarely-used-wadkin-cc-1.jpg
Frederick Skelly
01-14-2017, 3:15 PM
That's a heck of a setup Jack! Looks like once you get 'er dialed in, it's a perfect fit. I'm green with envy!
Fred
Ben Abate
01-14-2017, 5:17 PM
That is amazing. I'd rather watch than operate that big one. Wow
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.