Air Regulation Valve

[Brian Book]

Hi all what is everyone using for Air Regulation at the Nozzle ? .... not sure of the Diameter if the PVC Hose but I would like to have one before I start using my machine.

Thanx

Brian

[Doug Fisher]

Not sure if this is what you mean but it is cost and low tech.

6mm Pneumatic Ball Valve Connector Push In Fitting

http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.X6mm+Pneum atic+Ball+Valve+Connector+Push+In+Fitting+.TRS0&_nkw=6mm+Pneumatic+Ball+Valve+Connector+Push+In+Fi tting+&_sacat=0

[Jerome Stanek]

I use a small regulator like this one

http://www.harborfreight.com/150-psi-air-compressor-regulator-kit-with-dial-gauge-68223.html

[Keith Downing]

I use a small regulator like this one

http://www.harborfreight.com/150-psi-air-compressor-regulator-kit-with-dial-gauge-68223.html

I also use something very similar to this, although mine has a moisture trap and drain.

[Jerome Stanek]

I have water traps at the compressor and at each drop.

[Brian Book]

Thank You all for your replies :)

Brian