View Full Version : Air Regulation Valve
Brian Book
01-13-2017, 4:48 PM
Hi all what is everyone using for Air Regulation at the Nozzle ? .... not sure of the Diameter if the PVC Hose but I would like to have one before I start using my machine.
Thanx
Brian
Doug Fisher
01-13-2017, 7:18 PM
Not sure if this is what you mean but it is cost and low tech.
6mm Pneumatic Ball Valve Connector Push In Fitting
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.X6mm+Pneum atic+Ball+Valve+Connector+Push+In+Fitting+.TRS0&_nkw=6mm+Pneumatic+Ball+Valve+Connector+Push+In+Fi tting+&_sacat=0
Jerome Stanek
01-14-2017, 6:32 AM
I use a small regulator like this one
http://www.harborfreight.com/150-psi-air-compressor-regulator-kit-with-dial-gauge-68223.html
Keith Downing
01-14-2017, 2:10 PM
I use a small regulator like this one
http://www.harborfreight.com/150-psi-air-compressor-regulator-kit-with-dial-gauge-68223.html
I also use something very similar to this, although mine has a moisture trap and drain.
Jerome Stanek
01-14-2017, 5:12 PM
I have water traps at the compressor and at each drop.
Brian Book
01-14-2017, 8:23 PM
Thank You all for your replies :)
Brian
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.