PDA

View Full Version : Automatic Cermark Stirrer



John Kleiber
01-05-2017, 5:48 PM
I got tired of stirring Cermark settled at the bottom of high priced 250g bottles, so I had an idea.

Put (2) 1/2" Nuts or ball bearings or washers etc, into Cermark 250g bottle, place bottle in rock tumbler for a few hours prior use or every once in a while to keep stirred and fresh.


Fits bottle perfect.
350851


4" PVC pipe with end caps for bottles which are misshaped or too small.
350852

Gary Hair
01-05-2017, 6:37 PM
I built one that holds two bottles of Cermark and two containers of white ink for my UV printer. It runs 24/7 and I never have to worry about mixing again! No need to put any nuts or washers inside when it runs continuously.

Bruce Volden
01-05-2017, 8:54 PM
BRILLIANT!!!!
Shows I'm never too old to learn.

Bruce

John Kleiber
01-06-2017, 12:06 AM
I built one that holds two bottles of Cermark and two containers of white ink for my UV printer. It runs 24/7 and I never have to worry about mixing again! No need to put any nuts or washers inside when it runs continuously.

True enough regarding no need to add nuts or washers. But if you had seen the Cermark caked at the bottom of one bottle I accidentally left open, it was clear the Cermark needed a little help.