Jonathan Lo
12-31-2016, 5:10 AM
First post, but long time lurker. Lots of good information on this site. Thank you to everyone for sharing your knowledge.
About me:
I've enjoyed woodworking for about 10 years, although still a novice. My "shop" is a 2-car garage that has typical house storage and a car in it. Move the car out to work on my projects. My projects are typically honey-do stuff ("Shabby chic" whatever that means, home improvement, etc). I've just started dabbling in boxes and cutting boards. I've made 1 box and 2 cutting boards (edge grain). They turned out alright.
Tools
I'll have a new DeWalt DWE7491RS coming in on the 3rd of January to replace my old beat up Craftsman. I chose a job-site saw due to the lack of space.
Triton TRA001 mounted to a home-made table (half a solid-core door and cabinet base) via a Woodpecker plate
Double bevel compound miter saw (DeWalt)
HF belt sander
DeWalt combo cordless set. Batteries last long enough to rip a sheet of plywood twice.
Tools I want to get in the near future
DW735X planer (ordering it when it is in stock at HD)
Scroll saw
belt/disc sander
Drill press
Jointer
Band saw (towards the bottom of the list)
Lots of router bits! I only have 4 right now.
Future Projects:
redoing garage storage to hopefully open up more space
adding storage to my router table. Currently it only has two sides, a back and a top.
End grain cutting board for my wife
New assembly table. Temporary, so probably 2x and plywood or MDF construction
Box joint jig. For table saw or router table. The last one I tried to make didn't work out.
Thanks for reading and feel free to comment or ask questions!
About me:
I've enjoyed woodworking for about 10 years, although still a novice. My "shop" is a 2-car garage that has typical house storage and a car in it. Move the car out to work on my projects. My projects are typically honey-do stuff ("Shabby chic" whatever that means, home improvement, etc). I've just started dabbling in boxes and cutting boards. I've made 1 box and 2 cutting boards (edge grain). They turned out alright.
Tools
I'll have a new DeWalt DWE7491RS coming in on the 3rd of January to replace my old beat up Craftsman. I chose a job-site saw due to the lack of space.
Triton TRA001 mounted to a home-made table (half a solid-core door and cabinet base) via a Woodpecker plate
Double bevel compound miter saw (DeWalt)
HF belt sander
DeWalt combo cordless set. Batteries last long enough to rip a sheet of plywood twice.
Tools I want to get in the near future
DW735X planer (ordering it when it is in stock at HD)
Scroll saw
belt/disc sander
Drill press
Jointer
Band saw (towards the bottom of the list)
Lots of router bits! I only have 4 right now.
Future Projects:
redoing garage storage to hopefully open up more space
adding storage to my router table. Currently it only has two sides, a back and a top.
End grain cutting board for my wife
New assembly table. Temporary, so probably 2x and plywood or MDF construction
Box joint jig. For table saw or router table. The last one I tried to make didn't work out.
Thanks for reading and feel free to comment or ask questions!