Ken Krawford
12-26-2016, 1:54 PM
350154
I'm doing a rough copy of the table shown above. I've used Dominoes for all the joinery so far. The two shelves are a 3 board glue up with the center piece equal to the width of the side apron and the other 2 pieces equal to the widths of the legs. Unfortunately I did the shelf glue up before cutting the Domino mortises in the front and back ends of the shelves . Since the legs are 2 1/2 " diam. , there isn't enough room to get the machine in to cut the mortises.
Any suggestions on how to attach these shelves?
I'm doing a rough copy of the table shown above. I've used Dominoes for all the joinery so far. The two shelves are a 3 board glue up with the center piece equal to the width of the side apron and the other 2 pieces equal to the widths of the legs. Unfortunately I did the shelf glue up before cutting the Domino mortises in the front and back ends of the shelves . Since the legs are 2 1/2 " diam. , there isn't enough room to get the machine in to cut the mortises.
Any suggestions on how to attach these shelves?