PDA

View Full Version : Source for cabinet doors/drawers?


bill kiss
10-08-2005, 6:43 PM
LOML has decided I am going to remodel our kitchen. :eek: After sticker shock on the price of cabinets at the BORG, I believe I can build them a lot cheaper (and better) I would prefer to purchase the doors and drawer fronts. Any suggestions? THANKS IN ADVANCE, Bill
Frank Hagan
10-08-2005, 6:55 PM
I had a similar situation a few years back, and we found a local cabinet shop that sold us doors at a pretty good price.

Its worth checking to see if the Borg sells doors only; they may be higher on them than a local shop would be, though, so check around.
Kevin Post
10-08-2005, 7:14 PM
Bill:

There is a company called Walzcraft in La Crosse, WI that makes cabinet doors and drawer boxes. If you do a Google search you'll be able to find their website.

I am not affiliated with them nor have I purchased anything from them. However, I live in the area and know people who have used them and were happy with their product.

-Kevin
Lee DeRaud
10-08-2005, 7:32 PM
Its worth checking to see if the Borg sells doors only; they may be higher on them than a local shop would be, though, so check around.Home Depot used to, at least out here...haven't looked in awhile. Look for a rack of brochures near the "prefab" (e.g. Mills Pride) cabinets.
Rick Shelton
10-08-2005, 8:05 PM
Try http://www.cabinetdoorshop.com/

I'm simply amazed at the prices they sell doors.
Richard Wolf
10-08-2005, 8:15 PM
Your profile doesn't say what area you live in, because there is a ton of good suppliers. It really does not make sense to build your doors and drawer unless you really have all the time in the world or need the braging rights.
Take a look at; www.keystonewood.com (http://www.keystonewood.com)

Richard
Dave Falkenstein
10-08-2005, 8:21 PM
I have purchased raised panel cabinet doors from California Door with excellent results:

http://www.caldoor.com/home.htm
Jim Hager
10-08-2005, 8:42 PM
LOML has decided I am going to remodel our kitchen. :eek: After sticker shock on the price of cabinets at the BORG, I believe I can build them a lot cheaper (and better) I would prefer to purchase the doors and drawer fronts. Any suggestions? THANKS IN ADVANCE, Bill

Where are you located??

http://a3.cpimg.com/image/87/88/44580743-b80c-02000180-.jpg

If shipping is not an issue:p
Jason Quick
10-08-2005, 9:17 PM
Try http://www.cabinetdoorshop.com/

I'm simply amazed at the prices they sell doors.

Care to elaborate, give an example? I'm scouting suppliers myself for new construction, but haven't got a plan to work from just yet, so an actual quote is a bit hard to get...

Jason
Wes Bischel
10-09-2005, 12:54 AM
Take a look at; www.keystonewood.com (http://www.keystonewood.com)


Well, blow me down. I drive past those guys on a regular basis. Always wondered what they did. :rolleyes: Have purchased from them Richard? their site says they are wholesale only.

Wes
Vaughn McMillan
10-09-2005, 4:24 AM
Where are you located??

http://a3.cpimg.com/image/87/88/44580743-b80c-02000180-.jpg

If shipping is not an issue:p
Jim, ya know if you blow the sawdust off your camera once in a while it wouldn't look like you're making doors in a snowstorm. :D Looks like you've been busy, though.

- Vaughn
John Motzi
10-09-2005, 6:31 AM
Well, blow me down. I drive past those guys on a regular basis. Always wondered what they did. :rolleyes: Have purchased from them Richard? their site says they are wholesale only.

Hi Wes,

I used Keystone for doors & drawer fronts for my home office. I had a good experience with them although they are not inexpensive.

John Motzi
Dowingtown, PA
Rick Shelton
10-09-2005, 9:43 AM
Care to elaborate, give an example? I'm scouting suppliers myself for new construction, but haven't got a plan to work from just yet, so an actual quote is a bit hard to get...

Jason

I dug one up. I had them quote a job for 23 paint grade raised panel doors (no mdf) and 8 drawer fronts. The doors averaged ~14 x 26 for 13 uppers and ~14 x 22 for 10 lowers. The quote came in at $675 DELIVERED! That's well less than $30/door delivered. Don't think I'd make 'em for that.

BTW, super nice people to deal with. Give them a call, they'll be glad to work up a quote for you.
Jim Hager
10-09-2005, 3:00 PM
Jim, ya know if you blow the sawdust off your camera once in a while it wouldn't look like you're making doors in a snowstorm. :D Looks like you've been busy, though.

- Vaughn

There is a wise guy in every croud:D I know I need to clean off the lense before I take a shot.

I actually built those doors last spring. I have turned out in the neighborhood of around 600 since then. I had the best 1/4 I have ever had in July, August and Sept. For a part time business we really did alright.