Ideas please for mobile base for a lathe

[Brian Deakin]

I currently have my lathe mounted on a metal base which has a sawhorse design


I have a set of 4 industrial casters .Can anyone please suggest how I can attach the casters so they can be used to raise the stand to move it round the garage then lower it back onto the legs
,


348598

[John K Jordan]

I currently have my lathe mounted on a metal base which has a sawhorse design
I have a set of 4 industrial casters .Can anyone please suggest how I can attach the casters so they can be used to raise the stand to move it round the garage then lower it back onto the legs


Commercial solutions sometimes use a lever/spring/lock mechanism which would be difficult to make.

If you don't move it often, you could do like some: lift the ends and set them on those little furniture dollies (or homemade versions). Our club uses this method to move a fairly heavy Jet 1642 into place for each meeting. However, that would need more casters since each dolly needs 4.

Turner John Lucas made a couple of things, each with two casters and made so the frame at the end of the lathe will sit into a recess. He jacks up one end of the lathe (about 700 lathe) and slips this thing underneath.

At Appalachian school for craft the turning shop guy had constructed a lever with a long handle that could jack up one end of the lathe as needed.

You could probably construct something with a caster on the bottom and a socket of sorts to set the lathe stand foot into. Hard to envision the exact design without being there.

JKJ

[Brice Rogers]

I've got my table saw, radial arm saw and bandsaw on casters/roller stand. I press down on a cam-actuated foot and it raises the casters and allows it to roll. When I get it to the right location, I can lower it. I think that Rockler still sells them as well as others.

You can buy these roller stands/casters for around $50-65 I think. They probably list the weight rating in the advertisements. I think that they would work with something up to maybe a couple hundred pounds. I notice that you didn't mention the weight of your lathe. If you mention that, it will be helpful to give you a better answer.

[Grant Wilkinson]

I have this under my Vega

http://vegawoodworking.com/product/machine-mover/

You could diy something similar quite easily, still using your sawhorses.

[Sam Force]

Look at Carl Holmgren videos on Youtube, if you already have the casters the rest of materials you would probably have in scrap wood. Might need to buy a couple hinges though

[Steve Peterson]

I would add a 24-30" 2x4 under each end of your sawhorse and bolt the casters underneath. You can increase the length of the 2x4s to increase stability without sacrificing your foot space. Use the existing bottom bolt holes to attach the 2x4s to the legs. You might need to cut the legs shorter depending on the height of your casters.

Steve

[Keith Buxton]

here is a link to a moblie base for lathes i built one just like this for my grizzly G0766 and it works great to move my lathe around.

https://www.woodturnerscatalog.com/p/110/4697/Lift-Lock-and-Roll-Lathe-Mobility-System

[Brice Rogers]

I'm hoping that the original poster comes back and lets us know how heavy of a lathe he/she has. The solution is dependent on the weight of the lathe....

[Brian Deakin]

Please accept my apologies for the delay in replying
Firstly a big thank you for the ideas and links

The lathe is a mini lathe weighing 100 lbs

At present I am leaning towards the image below

Please see link

https://s-media-cache-ak0.pinimg.com/236x/14/d8/25/14d825dd7db5efbdc4018d385be9b002.jpg

[Dick Mahany]

Here's what I did for my Jet 1642. It allows ease of mobility and quick ability to set it back onto the lathe feet for stability.

349163

[susan mahler]

Here's what I did for my Jet 1642. It allows ease of mobility and quick ability to set it back onto the lathe feet for stability.

349163
would it be possible for you to send or provide link to the plans.? thank you!

[Richard Coers]

Not what you are asking for, but this idea is pure genius. http://www.ttit.id.au/gadgets/gadgets.htm#Lifter2

[Don Bunce]

https://sawmillcreek.org/showthread.php?119919-1642-Balast-amp-Storage&p=2386786&highlight=#post2386786
this us what I did for mine.

[ChrisA Edwards]

https://sawmillcreek.org/showthread.php?119919-1642-Balast-amp-Storage&p=2386786&highlight=#post2386786
this us what I did for mine.

I really like that. That may be the way I go to add mobility to my future 18-36 or 24-36. I wonder if 4 pneumatic cylinders could be used to lift the lathe while it was moved.