Jeff Bartley
11-29-2016, 5:45 PM
For 10 years I've had a Jet cabinet saw with a micro-adjust xacta fence. This fence was one of the reasons I bought the saw. It's so easy to cut joinery with this set up: one turn equals 1/16".
Today the romance came to a halt when the clamping lever for the micro-adjust stripped out. Fortunately there were enough threads left in the housing that I was able to chase the threads and use a bolt to take over clamping duty, the little clamping lever is toast.
I can't even find the fence on any replacement part sources.
Anyone else out there have any experience with this fence?
Today the romance came to a halt when the clamping lever for the micro-adjust stripped out. Fortunately there were enough threads left in the housing that I was able to chase the threads and use a bolt to take over clamping duty, the little clamping lever is toast.
I can't even find the fence on any replacement part sources.
Anyone else out there have any experience with this fence?