PM2000 table insert

[Robert Hayward]

Is the table insert on a PM2000 the same size as one on a PM66 ? I would like to get a Leecraft zero clearance insert for a PM2000 and see inserts for the PM66 only.

[Bryan Lisowski]

The following lists a insert for the PM2000. It seems to be larger than the PM66.

http://www.eagleamerica.com/product/v400-1100/table_saw_blades_and_accessories

[Robert Hayward]

Thank you Bryan. I see the difference now. $35.00 seems like a lot of money for an insert. What do others use ?

[Cary Falk]

I make my own. Rockler sells a phenolic for $31 that makes 2. I bought a bunch of Corian sink cutouts from a countertop fabricator for $5 a pop. Each make about 4.

[Jim Becker]

Robert, consider making your own. If you can use pattern routing to make exact duplicates of the OEM insert out of MDF, Plywood, phenolic materials, solid wood, etc., so you have a constant supply of zero clearance inserts available whenever you want to change them out.