View Full Version : Tungsten Carbide Dog Tag
Liesl Dexheimer
11-16-2016, 6:13 PM
I have a customer who dropped off a tungsten carbide dog tag that she would like to have engraved. It's shiny so I don't think CerMark will work on it. I'm assuming you would need a FiberMark laser for this type of metal, correct?
Liesl Dexheimer
11-19-2016, 1:07 PM
Thought I would answer my own question so others will know. Yes, you can use CerMark on tungsten carbide metal. I was able to engrave the dog tag and not have the CerMark rub off. :)
Kev Williams
11-20-2016, 12:35 AM
Thanks for finding out for us! I've have lots of carbide tools around here, never thought to try Cermark on one. :)
Tim Bateson
10-30-2017, 6:06 PM
Anyone tried using a fiber on Tungsten Carbide tags?
Scott Shepherd
10-30-2017, 6:27 PM
Anyone tried using a fiber on Tungsten Carbide tags?
Have used it on carbide, but not a tag. It marks wonderfully.
Tim Bateson
10-30-2017, 6:34 PM
Have used it on carbide, but not a tag. It marks wonderfully.
Ballpark settings? Your Fiber wattage?
Scott Shepherd
10-30-2017, 9:49 PM
Not at work, but it was fast, and probably 80KHz. It leaves a nice mark that you can’t feel at all but looks razor sharp. Maybe 20 ips, possibly a couple passes, but I don’t have it with me. You almost can’t do much wrong to it at 80KHz.
Tim Bateson
11-02-2017, 5:25 PM
On my 50w Fiber, I used 2 passes at 2000sp 30%pw 90KHz.
370862370861
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.