Anybody install an Accusquare on a Sawstop

[Kirby Bradley]

Has anybody installed an Accusquare Table Saw Rip Fence on a Sawstop saw. I have been looking at that fence and would appreciate any feedback

[Ben Rivel]

Which fence do you have and what do you not like about it?

[Curt Harms]

I have the accusquare fence and am happy with it. It's pretty simple and mounting it involves drilling holes in the aluminum rail. You should be able to use existing holes in your saw unless the existing holes are well below the saw table top. There is one consideration not there for Bies style fences. The Fence cannot be lifted off, it has to be slid off one end of the saw. This is not an issue unless you replace a table saw wing with a router table and mount a second fence. Just something to think about.

[Jon Endres]

I've had an Accusquare fence for years, first on an old Craftsman/Atlas benchtop saw and then on my Unisaw, which came without a fence. I like it, it's pretty solid, it's easily adjustable, stays locked when locked, and holds position well (i.e. does not need to be re-calibrated frequently).