PDA

View Full Version : Epilog 45TT air assist removal



tony mazzone
10-01-2016, 9:21 PM
Hi All,

I have to engrave a bunch of wooden dishes that have about a 1 inch lip on them. The metal curved nozzle on the air assist will hit the edge when I focus down to the proper height. Can this nozzle be removed easily? It swivels back and forth but I don't want to force and break it.

Thanks,
Tony

Tony Lenkic
10-02-2016, 10:47 AM
Tony,

Some users have do just that when faced with same issues. Have you inquired on longer focal point lens?

Glen Monaghan
10-02-2016, 7:08 PM
Yep, there's a set screw in back where the tube enters the back side of the mirror/lens assembly. Push the head from home position over to the right so you can see back there and use a small flashlight to illuminate the area. IIRC, it needs a 3/32" allen wrench. Careful not to lose the screw!

tony mazzone
10-02-2016, 10:17 PM
Thanks Glen