Let's play a game...what do these belong to?

[Anthony Whitesell]

I 'inherited' a bunch of wood working stuff. Some items I don't know to what they belong.

Item #1:
344403
A full circle router base. But for what router?

Item #2:
344404
Router plate with one flat edge. Larger than item #1. Is it for a plunge router? What router?

Item #3:
344405
Router plate with bushing insert. Looks universal, but can't find the holes that would fit by Bosch 1617. Is it universal or for a specific router, which one?

Item #4:
344406
Looks like 3 router bushings of two different sizes. Any idea which router base they fit?

Item #5:
344407
All metal router table ring inserts. Any idea for which router table or router lift?

[Walter Plummer]

One and two sure look like my Makita plunge and I know they made both a round base and one with a straight side. No clue on the others.

[Anthony Whitesell]

As I can figure #1 and #2 can't be for the same router. #2 is substantially larger than #1. The mountings aren't even close. Neither line up with my Bosch 1617. I also have access to a 3HP PC base, and they don't fit that either.

[Cary Falk]

#2 looks like the one on my Hitachi M12V. If it is 7" OD and 3.5" id then it probably is.
#3 is a universal base. I had./ may still have one. I think it was made by Vermont American among others http://vermontamerican.com/products/guide-bushings/
#4 best guess would be Craftsman but I don't know.

[John McClanahan]

3, 4, and 5 look like Sears items.

[Wayne Lomman]

#1 looks like a Makita base and #4 look like Makita guides but if it is 2 different sizes it will depend on which ones fit #1. Cheers

[Bruce Page]

Just a suggestion, laying a 6" rule in the pictures would help give scale to the items.

[Charles Lent]

The last (red) ones look like Ryobi oscillating sander inserts, but they aren't a full set.

Charley

[Anthony Whitesell]

The last (red) ones look like Ryobi oscillating sander inserts, but they aren't a full set.

Charley

Metal inserts for an OSS? That would be a first that I have seen. I thought for a (higher end, metal?) router table plate. I know they don't fit my Rouseeau lift.

I thought of the ruler too late. Only the last picture has it, then the battery in the camera died.

[Mike Circo]

Number 3 is indeed a "Universal router base". Why it won't fit your router may be due to some missing pieces.
The slotted holes are also mounting holes. There were a set of washer-like inserts with a countersunk head to admit a baseplate screw. Since they were in slots, they could slide around in the slots to give a wider range of spacing for some routers.

I have one and it fits my PC 690, and I may have mounted it to my Bosch 1613 also.

[Bruce Page]

Metal inserts for an OSS? That would be a first that I have seen. I thought for a (higher end, metal?) router table plate. I know they don't fit my Rouseeau lift.

I thought of the ruler too late. Only the last picture has it, then the battery in the camera died.
They're pretty common. This is what they look like for my BOSS spindle sander: