Mike Allen1010
09-14-2016, 4:56 PM
I’m interested in learning how to “shoot” moldings using hollows and round molding planes. One of my biggest struggles has been getting straight, square rabbits to guide the H&R’s.
I find rabbit planes to be some of the most difficult for me to set up correctly. I struggle aligning the knicker, edge of the blade and sole so I get clean corners. When trying to make moldings It seems I spend more time making the rabbits then I do actually making the curved molding profiles.
In an effort to improve my efficiency I made this 14”rabbit plane out of cherry using a replacement iron from the similar Lee Valley plane. The 14” sole is longer than my other rabbit plane and I hoped that would help give me more consistent results.
http://i1078.photobucket.com/albums/w498/mikeallen1010/tool%20sale/Rabbitt%20Plane/1_zpsphofkyup.jpg (http://s1078.photobucket.com/user/mikeallen1010/media/tool%20sale/Rabbitt%20Plane/1_zpsphofkyup.jpg.html)
I’m not much of a plane maker, I’d much rather get one from a professional like Steve Voigt who actually knows what he’s doing. The few planes I’ve built previously were laminated construction. This time I took the plunge and made this one from a single billet. Chopping the bed mortice took forever and it’s not really very flat/straight. By the time I got done the cheeks were too thin to use abutments to hold the wedge, so I used a brass rod with a wooden cross piece attached to add a little more surface area. The brass wear plate is left over from a saw back.
Initially I added the knickers directly to the body of the plane. However that didn’t work very well when I tried to start a rabbit using a marking gauge line – the nicker followed the grain and made it tough to get a straight edge.
http://i1078.photobucket.com/albums/w498/mikeallen1010/tool%20sale/Rabbitt%20Plane/2_zpse9xbvtdf.jpg (http://s1078.photobucket.com/user/mikeallen1010/media/tool%20sale/Rabbitt%20Plane/2_zpse9xbvtdf.jpg.html)
http://i1078.photobucket.com/albums/w498/mikeallen1010/tool%20sale/Rabbitt%20Plane/3_zpsqnaeicbe.jpg (http://s1078.photobucket.com/user/mikeallen1010/media/tool%20sale/Rabbitt%20Plane/3_zpsqnaeicbe.jpg.html)
I added an adjustable knicker and a cocobolo wear strip in the corner, which worked better.
http://i1078.photobucket.com/albums/w498/mikeallen1010/tool%20sale/Rabbitt%20Plane/4_zps6umtpfme.jpg (http://s1078.photobucket.com/user/mikeallen1010/media/tool%20sale/Rabbitt%20Plane/4_zps6umtpfme.jpg.html)
http://i1078.photobucket.com/albums/w498/mikeallen1010/tool%20sale/Rabbitt%20Plane/5_zpshtvlqncr.jpg (http://s1078.photobucket.com/user/mikeallen1010/media/tool%20sale/Rabbitt%20Plane/5_zpshtvlqncr.jpg.html)
Eventually I decided to just add an adjustable, removable fence so I could do away with the marking gauge line as a first step.
http://i1078.photobucket.com/albums/w498/mikeallen1010/tool%20sale/Rabbitt%20Plane/6.5_zpsbsyq6ukl.jpg (http://s1078.photobucket.com/user/mikeallen1010/media/tool%20sale/Rabbitt%20Plane/6.5_zpsbsyq6ukl.jpg.html)
http://i1078.photobucket.com/albums/w498/mikeallen1010/tool%20sale/Rabbitt%20Plane/6_zps72svbkmq.jpg (http://s1078.photobucket.com/user/mikeallen1010/media/tool%20sale/Rabbitt%20Plane/6_zps72svbkmq.jpg.html)
I find rabbit planes to be some of the most difficult for me to set up correctly. I struggle aligning the knicker, edge of the blade and sole so I get clean corners. When trying to make moldings It seems I spend more time making the rabbits then I do actually making the curved molding profiles.
In an effort to improve my efficiency I made this 14”rabbit plane out of cherry using a replacement iron from the similar Lee Valley plane. The 14” sole is longer than my other rabbit plane and I hoped that would help give me more consistent results.
http://i1078.photobucket.com/albums/w498/mikeallen1010/tool%20sale/Rabbitt%20Plane/1_zpsphofkyup.jpg (http://s1078.photobucket.com/user/mikeallen1010/media/tool%20sale/Rabbitt%20Plane/1_zpsphofkyup.jpg.html)
I’m not much of a plane maker, I’d much rather get one from a professional like Steve Voigt who actually knows what he’s doing. The few planes I’ve built previously were laminated construction. This time I took the plunge and made this one from a single billet. Chopping the bed mortice took forever and it’s not really very flat/straight. By the time I got done the cheeks were too thin to use abutments to hold the wedge, so I used a brass rod with a wooden cross piece attached to add a little more surface area. The brass wear plate is left over from a saw back.
Initially I added the knickers directly to the body of the plane. However that didn’t work very well when I tried to start a rabbit using a marking gauge line – the nicker followed the grain and made it tough to get a straight edge.
http://i1078.photobucket.com/albums/w498/mikeallen1010/tool%20sale/Rabbitt%20Plane/2_zpse9xbvtdf.jpg (http://s1078.photobucket.com/user/mikeallen1010/media/tool%20sale/Rabbitt%20Plane/2_zpse9xbvtdf.jpg.html)
http://i1078.photobucket.com/albums/w498/mikeallen1010/tool%20sale/Rabbitt%20Plane/3_zpsqnaeicbe.jpg (http://s1078.photobucket.com/user/mikeallen1010/media/tool%20sale/Rabbitt%20Plane/3_zpsqnaeicbe.jpg.html)
I added an adjustable knicker and a cocobolo wear strip in the corner, which worked better.
http://i1078.photobucket.com/albums/w498/mikeallen1010/tool%20sale/Rabbitt%20Plane/4_zps6umtpfme.jpg (http://s1078.photobucket.com/user/mikeallen1010/media/tool%20sale/Rabbitt%20Plane/4_zps6umtpfme.jpg.html)
http://i1078.photobucket.com/albums/w498/mikeallen1010/tool%20sale/Rabbitt%20Plane/5_zpshtvlqncr.jpg (http://s1078.photobucket.com/user/mikeallen1010/media/tool%20sale/Rabbitt%20Plane/5_zpshtvlqncr.jpg.html)
Eventually I decided to just add an adjustable, removable fence so I could do away with the marking gauge line as a first step.
http://i1078.photobucket.com/albums/w498/mikeallen1010/tool%20sale/Rabbitt%20Plane/6.5_zpsbsyq6ukl.jpg (http://s1078.photobucket.com/user/mikeallen1010/media/tool%20sale/Rabbitt%20Plane/6.5_zpsbsyq6ukl.jpg.html)
http://i1078.photobucket.com/albums/w498/mikeallen1010/tool%20sale/Rabbitt%20Plane/6_zps72svbkmq.jpg (http://s1078.photobucket.com/user/mikeallen1010/media/tool%20sale/Rabbitt%20Plane/6_zps72svbkmq.jpg.html)