View Full Version : Full extension slides on the flat
Rick Fisher
08-29-2016, 5:14 PM
Anyone ever use Full extension drawer slides on the flat ?
Apparently they are rated for 25% of the usual rating .. so a 75lb slide would be rated for 18 lbs ?
Steve Jenkins
08-29-2016, 6:24 PM
I've done that several times with the Accuride 3800 series. Works fine
Jim Becker
08-29-2016, 9:03 PM
I've done it with the lower drawer units for some of the tack trunk commissions I've done using three. It worked out fine.
Bill Orbine
08-29-2016, 9:16 PM
I done them on the flat to keep wide drawers from racking. This to go with whatever slides in standard position.
Andrew J. Coholic
08-29-2016, 9:33 PM
I done them on the flat to keep wide drawers from racking. This to go with whatever slides in standard position.
I have done this as well. Works great.
Rick Fisher
08-30-2016, 2:01 AM
thanks all
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.