Cody Colston
08-21-2016, 4:25 PM
I put this together last week. It's built primarily from 1/2" BB ply. The tables is 2-axis, in out, side to side. The t-track allows the clamp guide to be placed parallel to the fence, at 90 degrees or even at 45 degrees. (I still have a short piece of t-track to add...ordered) I closed in around the router base with some 1/4" ply, added a piece of 3/4" MDF for depth and epoxied in a collar for my shop vac hose. The vac got almost every chip on a test mortise.
A 5/16" bolt and knob on the underside of the fence provide fine-height adjustment. I power it with a PC 690 router in the fixed base which is bolted to the fence using nyloc nuts so that they don't vibrate loose. It works very well and my only regret is that I waited so long to build one.
342697 342698 342699 342700 342701
A 5/16" bolt and knob on the underside of the fence provide fine-height adjustment. I power it with a PC 690 router in the fixed base which is bolted to the fence using nyloc nuts so that they don't vibrate loose. It works very well and my only regret is that I waited so long to build one.
342697 342698 342699 342700 342701