View Full Version : help setting up my rotary
billy fayo
08-20-2016, 9:17 PM
i have a RedSail X700 60W. my old laser has a switch. i flip the switch and the y turns off and the rotary turns on.. i have the rotary hooked up. im just not sure hot to switch it over to make it work.
Mark Sipes
08-22-2016, 4:05 PM
I Know nothing of Red Sail....or your old machine.....I would ask if you had a manual ( paper or CD) but I can guess the answer.
In your software do you define the diameter of the object to be engraved?? or at the panel ??
Is there possible a Switch in the control panel?
With the rotary plugged in power on .. is the y axis movement still at the head and not the rotary or nothing at all.......?
do you need to unplug the table axis with the rotary plugged in.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.