PDA

View Full Version : saw mill blade sharpining



david privett
08-20-2016, 8:46 AM
For those who are in the s.e. part of the states you might want to consider for your bandsaw mill sharpening needs Jordan's band saw service ph# 1 877 313 4078 . address 5130 old tunnel hill rd. Cohutta, Ga. 30710 . I have not used the blades yet but they look very good and he is reasonable priced. he only sharpens mill blades.

david privett
09-10-2016, 8:44 PM
I used one of the sharpened blades I had done in some pine and they almost cut as good as a new one. so at 6.50 to have one done it works for me.

Scott T Smith
09-10-2016, 10:44 PM
David, thanks for the lead. I've used Payne's for some of my circular blades, along with Menominee. Last year I switched over to Precision Saw Works in Polkton, NC and could not be more pleased. They can repair, retension and sharpen circular saw blades, band saw bands, specialized planer blades, edger blades, you name it. They can also resharpen carbide tipped bands such as Lennox Tri-masters.

I have found that their resharpened and repaired products work better than the blades did new.