steven c newman
07-26-2016, 4:51 PM
In spite of these sore hands. Just can't sit around and do nothing, it seems. You might remember a little eggbeater drill I "picked" awhile back, kind of got lost in all the other items needing cleaned up..
341493
Just $3..... Anyway, finally got it apart, wire wheeled clean, oiled the moving parts, and a fresh coat of paint...or two
341494
Tried to match the OEM colours. The handles have a 3in1 Oil finish. Chuck works nicely, the three jaws work as needed. This is a single gear drive..
341495
And, was never drilled and tapped for a side handle. The name on the crank handle: GranLt Tool Comp. New York Germany
Drug out the Millers Falls No. 2-01..
341496
Bit of a size difference. The cap was at one time loose, so someone had glued it in place. Handle threaded onto the top of the frame.
All parts move nicely, seems to be a nice little drill. Not sure who made it, though..
341493
Just $3..... Anyway, finally got it apart, wire wheeled clean, oiled the moving parts, and a fresh coat of paint...or two
341494
Tried to match the OEM colours. The handles have a 3in1 Oil finish. Chuck works nicely, the three jaws work as needed. This is a single gear drive..
341495
And, was never drilled and tapped for a side handle. The name on the crank handle: GranLt Tool Comp. New York Germany
Drug out the Millers Falls No. 2-01..
341496
Bit of a size difference. The cap was at one time loose, so someone had glued it in place. Handle threaded onto the top of the frame.
All parts move nicely, seems to be a nice little drill. Not sure who made it, though..