steven c newman
07-13-2016, 10:53 AM
Had some pine blanks that I had earlier resawn down from a 4x4. Task was to turn them into S4S 3/4" x 3-1/2" boards. I get these four blanks done, then resaw the other two 4x4 pieces of leftovers.
340617
Ain't he cute? Anyway, I already had planed the saw marks and dippity-dos on the other face, before this shot.
340618
Takes awhile, to take all the high spots down to the level of the low ones. When I can get a shaving like this the full length, I am done.
340622
Something like this. The neds were a bit...special..
340624
A little "knotty"? Ok, back to the other side..
340625
Taking down the high points. Candle was rubbed on the sole of the planes. Planes?
340626
Yes, planes. I gave each a fair share of the work, wouldn't want them to get jealous of the others...
340627
Board is now S4S. On one of the nastier boards, I used a Stanley #5 that had a camber to the iron. Couple of spots around the knots were taken care of with a Millers Falls/Craftsman #3
340628
Well, with Igor on strike...I guess I get to bag all of this up, and haul off to the firepit...when the Old Ticker settles down a bit. I did get a start on the 1/2" blank......Brunch sounded better:D
340617
Ain't he cute? Anyway, I already had planed the saw marks and dippity-dos on the other face, before this shot.
340618
Takes awhile, to take all the high spots down to the level of the low ones. When I can get a shaving like this the full length, I am done.
340622
Something like this. The neds were a bit...special..
340624
A little "knotty"? Ok, back to the other side..
340625
Taking down the high points. Candle was rubbed on the sole of the planes. Planes?
340626
Yes, planes. I gave each a fair share of the work, wouldn't want them to get jealous of the others...
340627
Board is now S4S. On one of the nastier boards, I used a Stanley #5 that had a camber to the iron. Couple of spots around the knots were taken care of with a Millers Falls/Craftsman #3
340628
Well, with Igor on strike...I guess I get to bag all of this up, and haul off to the firepit...when the Old Ticker settles down a bit. I did get a start on the 1/2" blank......Brunch sounded better:D