Monte Milanuk
09-24-2005, 2:59 PM
well, this one isn't probably what most would consider 'fine' woodworking, though I'm sure someone w/ enough skill could make it so!
What I want to do is add some wood shelving to a locker at work. I work at a power plant (hydro-electric dam, to be specific) on rotating 12-hour shifts, so at times it feels like I 'live' there :rolleyes: Some people have done some basic stuff adding little plywood shelves, w/ little 1x2 legs on the sides, stacked on one another to give some shelving, but I'd like something a *little* nicer (and less rickety!) to put in mine. Talkin' standard sheet-metal locker room locker here, about 6' high and about 1' wide.
Anybody out there by chance seen/done anything like this? Frankly, I'm trolling for ideas/suggestions here. I've got a few ideas percolating around the old head, but I wouldn't mind 'borrowing' a few cool tips/tricks from folks, if you know what I mean :D
TIA,
Monte
What I want to do is add some wood shelving to a locker at work. I work at a power plant (hydro-electric dam, to be specific) on rotating 12-hour shifts, so at times it feels like I 'live' there :rolleyes: Some people have done some basic stuff adding little plywood shelves, w/ little 1x2 legs on the sides, stacked on one another to give some shelving, but I'd like something a *little* nicer (and less rickety!) to put in mine. Talkin' standard sheet-metal locker room locker here, about 6' high and about 1' wide.
Anybody out there by chance seen/done anything like this? Frankly, I'm trolling for ideas/suggestions here. I've got a few ideas percolating around the old head, but I wouldn't mind 'borrowing' a few cool tips/tricks from folks, if you know what I mean :D
TIA,
Monte