PDA

View Full Version : Help with 3 Jaw Chuck Rotary



Wayne Grecco
07-07-2016, 11:42 PM
Hello All,

I recently got my new Epilog Fusion 32 60W machine delivered and I also ordered the 3 jaw chuck rotary attachment with the machine. I have NEVER used a rotary attachment before, so I am a COMPLETE NEWBY with this thing. Can anyone give me some pointers as to how this thing works and how I set up the graphics in Corel so that they engrave properly?

If anyone has any suggestions, websites or videos that they can point me to, I would GREATLY APPRECIATE IT!!!

Thanks
Wayne

Mike Null
07-08-2016, 7:55 AM
Wayne

try going through this document. https://www.epiloglaser.com/downloads/pdf/fusion_rotary_attachment.pdf

Braden Todd
07-08-2016, 10:43 AM
I have one if you ever need some specific help on it. Not sure if they're the same but they should be pretty close.

Wayne Grecco
07-13-2016, 8:52 PM
Mike and Braden,

Thanks. I will check that link out and Braden thanks for the offer. I haven't even plugged it in yet!

Wayne

Braden Todd
07-13-2016, 11:02 PM
The one I have is great, but did take some practice to get used to it. Below is what mine looks like, is this what you have too?

Wayne Grecco
07-20-2016, 8:47 PM
Braden,

I will take a look and let you know if that's what mine looks like

Wayne